Checking Android Camera Sensor Specifications
Smartphone camera marketing frequently exaggerates capabilities, citing "200 Megapixels" or "100x Space Zoom" without detailing physical sensor dimensions, actual optical focal lengths, or hardware support levels.
To inspect true camera sensor specifications on Android: open Voodoo Hardware Info and select the Camera category. Voodoo queries Android's Camera2 CameraCharacteristics to display physical sensor millimeter dimensions, active raw pixel array bounds, true optical focal lengths, maximum lens apertures, pixel binning ratios, and firmware hardware support levels (FULL vs LIMITED).
Three Critical Metrics Beyond Megapixels
A larger physical sensor captures significantly more light photons. Voodoo reads SENSOR_INFO_PHYSICAL_SIZE (e.g. 7.6 x 5.7 mm for a 1/1.76" sensor), which is far more indicative of low-light photo quality than megapixel numbers.
By comparing the raw physical pixel array (e.g. 8000x6000 = 48 MP) with default stream output (4000x3000 = 12 MP), Voodoo detects Quad-Bayer (4:1) or Tetra²pixel (16:1) binning architectures.
Confirms whether third-party camera apps (like GCam or Open Camera) can access full manual controls: FULL or LEVEL_3 supports RAW capture and per-frame manual exposure; LIMITED does not.
Step-by-Step Camera Verification
- Open Voodoo Hardware Info and navigate to the Camera tab.
- Review Camera Count Breakdown: View total physical lenses (Wide, Ultrawide, Telephoto, Front) and whether the device groups them into logical multi-camera systems.
- Inspect Optical Focal Lengths: Verify true optical focal lengths in millimeters and their 35mm film equivalents to confirm if the zoom lens is genuine optical zoom or digital crop.
-
Check Aperture & OIS: Verify fixed apertures (e.g. f/1.8) or variable mechanical apertures (f/1.5 - f/2.4) and whether Optical Image Stabilization (
LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION) is present.
Voodoo inspects static metadata strictly via CameraCharacteristics. The app never instantiates a video stream or activates camera hardware. The green privacy indicator dot on Android 12+ will not turn on during inspection, and camera shutter hardware is completely protected from unnecessary wear.